Building the Drink Dispenser Stand and Carrier
This drink dispenser stand was super easy to build! First, I cut all my boards using a compound miter saw – but you could also use a circular saw or jigsaw for cuts.
Cutting the Handles
Since this drink dispenser stand flips to become a carrier for the drink dispensers, I wanted handles to help hold it. You could use hardware pulls as well. Here’s how I cut my handles out:
I first drilled two holes with a spade bit. Then I connected the two holes together with jigsaw cuts.
Building the Drink Dispenser Crate
Once the handles were cut, I can start building. I used brad nails to build – you can also use screws or staples – all work great, just a matter of tool availability and fastener preference. GLUE is essential if using nails or staples.
I built two sides identical, with the 1×2 attach on the inside. The 1×2 also works as a support for heavy drinks.
Then I attached the 1×2 for the bottom frame – this is all detailed in the plans below.
With the two sides done, I can now add the front and back pieces – it’s starting to take shape!
The bottom pieces fit inside and attach to the 1x2s. Also nail from the outsides.
Free Drink Dispenser Stand Plans
Here’s the free plans so you can build it too. Please send in photos when you are done, we love seeing and sharing your projects!
